Speco Thomas for Automotive Products
Home Page
 
PJ1 logo
PJ1 Performance Products
for Powersports and Motorsports


Made in the USA, a high end range for lubrication, engine, transmission, hydraulic fluids, air filtration, fuel systems, cleaners and protectants, Track Bite Traction Compound.

Download the PJ1 range

PJ1 Black Label PJ1 New Improved Black Label Heavy Duty Chain Lube
1-06A: 5 oz. aerosol
1-20: 13 oz. aerosol

Applies easily and penetrates into the pins and rollers to set up into a tacky, grease-like coating. PJ1 Black Label Heavy Duty Chain Lube’s resilient coating reduces chain stretching and shock that normally is encountered during off-road racing and riding. Displaces and repels water. Will not harden and crack like wax. Rated “Best Buy,” Motorcycle Consumer News’ top ranking, when tested among 22 other brands.

APPLICATION AND PERFORMANCE:
  • Fewer chain adjustments will be needed.
  • Excellent bearing lubricant
  • Protects against rust and corrosion
  • New super tacky formulation reduces dirty fly-off
  • Extends sprocket and chain life
  • Petroleum based
  • Minimal rolling resistance
  • O-Ring safe
  • Waterproof and heat resistant
  • Race proven
  • Environmentally friendly
  • Rated #1 by Motorcycle Consumer
PJ1 Blue Label O-Ring Chain Lube PJ1 Blue Label O-Ring
Chain Lube
1-08: 5 oz. aerosol
1-22: 13 oz. aerosol

Applies easily, penetrates and protects O-rings to keep them moist and pliable. Reduces chain friction and shock resulting in less wear and fewer adjustments.

APPLICATION AND PERFORMANCE:
  • Protects against rust and corrosion
  • Displaces and repels water
  • Extends O-Ring chain life
  • Protects sprocket surface from wear
  • Won’t fly off
  • Petroleum based
  • Minimal rolling resistance
  
PJ1 Black Label PJ1 Cable Lube Chain Lube
1-12: 11 oz. aerosol

Internal cable cleaner and lubricant.

APPLICATION AND PERFORMANCE:
  • Cleans and lubes in one easy application
  • Smoother and more precise cable operation
  • Quickly penetrates to clean and lube
  • Extends the life of all wire type brake, throttle and clutch cables
  • Protects against rust and corrosion
PJ1 Super Cleaner PJ1 Blue Label O-Ring
Chain Lube
3-20: 13 oz. aerosol


APPLICATION AND PERFORMANCE:
  • PJ1 SUPER CLEANER has been used for over 25 years by top mechanics to clean, degrease and prepare just about every surface on a car or motorcycle
  • PJ1 SUPER CLEANER can be used for pre-assembly of motors, carburettors and brake systems to quickly clean and evaporate leaving no residue or moisture on a prepared surfaces
  • PJ1 SUPER CLEANER is the #1 mechanic’s choice
  • PJ1 SUPER CLEANER uses an OZONE SAFE PROPELLANT and is completely recyclable when empty. New environmentally friendlier formula
  
PJ1 Fabric Filter PJ1 Fabric Air Filter Oil
4-20: 15 oz. aerosol


APPLICATION AND PERFORMANCE:
  • PJ1 Spray Fabric Air Filter Oil applies easily and improves performance of all gauze-type filter elements
  • PJ1 Spray Fabric Air Filter Oil filters out sand and dirt and is water repelling
  • PJ1 special formulation dye lets you know when gauze-type filter elements need to be serviced
  • Easy to apply
  • Red color indicates coverage and amount applied
  • Super tacky
PJ1 Foam Filter Treatment PJ1 Foam Filter Treatment
5-16: 1 pint

PJ1 new improved Liquid Foam Filter Treatment applies easily and improves the performance of all foam type filters. PJ1’s super tacky formula filters out the finest sand, grit and other abrasive particles that can harm vital engine components.

APPLICATION AND PERFORMANCE:
  • New formula is water repelling
  • Non-settling for no pooling
  • Easy to apply new lighter weight formula
  • Non-staining formula
  
PJ1 Spray Foam Filter Treatment (5-20) PJ1 Foam Filter Treatment
5-20: 13 oz. aerosol

PJ1 Spray Foam Filter Treatment protects high performance engines from costly repairs by improving the performance of all types of foam filters. With its NEW, SUPER TACKY formulation, sand, grit and other abrasive particles harmful to internal engine parts, are removed from intake air. This improved product is water repelling and non-settling.

APPLICATION AND PERFORMANCE:
  • Improved, no waste and easy to use
  • Water repellant and non-settling
  • Improved performance and efficient air flow
PJ1 LPC-3 Penetrant/Lubricant PJ1 LPC-3 Penetrant/Lubricant
12-11: 11 oz. aerosol

PJ1 LPC-3 Penetrant/Lubricant is the key to preventing rust and corrosion on all metal surfaces. PJ1 LPC-3’s superior lubrication properties lubricate all metal moving parts, penetrates deep to unlock frozen threads.

APPLICATION AND PERFORMANCE:
  • Prevents rust and corrosion
  • Deep penetrating formula
  • Excellent pivot point lubricant
  • Protect all metal surfaces
  • Stops squeaks and annoying joint noises
  
PJ1 Fuel Injector and Carb Cleaner Fuel Additive PJ1 Fuel Injector and Carb Cleaner Fuel Additive
13-12: 12 fluid oz.

PJ1 Fuel Injector and Carburettor Cleaner is a multi-functional concentrated intake system cleaner.

APPLICATION AND PERFORMANCE:
  • Overall gas/intake system cleaner
  • Cleans and maintains fuel injector/carburettor systems and intake valves with one treatment
  • Water emulsification
  • Rust inhibitors
  • Will not harm catalytic converters
  • Will not negatively interact with PJ1 lubricating oils
  • NOTE: Additive dosage/detergent will vary depending on fuel quality
SUGGESTED USAGE: 1 oz. per gallon of gasoline, every 3,000 miles to maintain optimal fuel system operation and cleanness.

TYPICAL PROPERTIES:
Gravity API
@ 60° F:
41
Density @ 60° F LB/US gal:6.83
Flash Point:110° F
Storage Stability:Excellent
Solubility in Hydrocarbon Solvent:Miscible
Colour:Green/Blue
PJ1 Octane Plus Fuel Additive PJ1 Octane Plus Fuel Additive
13-16: 16 fluid oz.

PJ1 Octane Plus Gas Energizer is formulated as an octane booster with secondary benefits as a fuel injector/carburettor system cleaner and fuel stabiliser.

APPLICATION AND PERFORMANCE:
  • Raises Octane
  • Helps reduce ‘knock” and “ping”
  • Helps improve engine efficiency
  • Gas/Intake cleaner
  • Mild water emulsification
  • Will not harm catalytic converters
  • Will not negatively interact with PJ1 lubricating oils
  • Compatible with mixed fuels with Ethanol additive
  • Incompatible with any blend of Methanol
SUGGESTED USAGE:
1 ounce per gallon for standard use 2 ounces per gallon for performance use

ESTIMATED OCTANE BOOST
PER USAGE:
1 oz. = 2½ points;
2 oz. = 4½ points

TYPICAL PROPERTIES:
Gravity API
@ 60° F:
32.5
Density @ 60° F LB/US gal:7.18 to 7.20
Flash Point:40° F TCC
Storage Stability:Good
Solubility in Hydrocarbon Solvent:Miscible
Colour:Straw/amber
  
PJ1 Spray and Wash Degreaser PJ1 Spray and Wash Degreaser
15-20: 13 oz. aerosol

PJ1 Spray and Wash Degreaser quickly penetrates to dissolve grease, dirt and soil, and easily washes off with a hose.

PJ1 Spray and Wash Degreaser can be used on any surface of equipment leaving no ugly residue and no annoying vapours during application.

APPLICATION AND PERFORMANCE:
  • Easy spray on wash off formula
  • Leaves surface clean and free from oils and dirt
  • Safe on all mechanical parts
PJ1 Foam Filter Cleaner (15-22) PJ1 Foam Filter Cleaner
15-22: 15 oz. aerosol

PJ1 Foam Filter Cleaner quickly dissolves dirt, grease, and grime with a simple spray on, wash off process. Eliminates soaking and rinsing dirty filters in gasoline and other solvents. PJ1 Foam Filter Cleaner will not harm filter glues.

APPLICATION AND PERFORMANCE:
  • Spray on, wait 15 minutes, wash off with water
  • Completely cleans filter with no additional washing afterwards
  • Won’t harm filter elements
  • Extends life of filter
  
PJ1 Air Filter Cleaner PJ1 Foam Filter Care Kit 15-202
Air Filter Cleaner 15-22
plus Foam Filter Oil 5-20 15 oz.

PJ1 Air Filter Cleaner quickly dissolves dirt, grease, and grime with a simple spray on, wash off process. Eliminates soaking and rinsing dirty filters in gasoline and other solvents. PJ1 Air Filter Cleaner will not harm filter glues.

PJ1 Spray Foam Filter Oil Treatment protects high performance engines from costly repairs by improving the performance of all types of foam filters. With its NEW, SUPER TACKY formulation, sand, grit and other abrasive particles harmful to internal engine parts, are removed from intake air.

APPLICATION AND PERFORMANCE:
  • Shrink wrapped for display
PJ1 Re-New & Pro-Tect PJ1 Re-New & Pro-Tect
23-8: 8 fluid oz.
23-16: 16 fluid oz.

Vinyl, Rubber, Leather, Wood and Polymer Surface Treatment. Super Silicone Moisturising formula renews all plastic, rubber, vinyl, wood and leather surfaces. Restores the original luster to old weathered surfaces. Re-New & Pro-Tect guards against the deteriorating effects of smog, UV Rays, moisture and weather which can bleach, dull or harden materials exposed to the elements. Re-new and Pro-Tect contains no damaging petroleum or plasticiser additives.

Water soluble, non-toxic, non-flammable and non-corrosive.

APPLICATION AND PERFORMANCE:
  • Makes old plastic fenders, side panels, vinyl seats and tires look like new
  • Penetrates and protects
  • Easy spray on, wait 10 minutes then wipe off
  • Leaves no oil residue
  
PJ1 Fog Blocker PJ1 Fog Blocker
25-4: 4 fluid oz.


APPLICATION AND PERFORMANCE:
  • Formulated to prevent fogging under the most extreme environments.
  • Increases safety through increased visibility
Ideal for use on:
  • Goggles
  • Face Shields
  • Glasses
  • Mirrors
PJ1 Carb & Choke Cleaner PJ1 Carb & Choke Cleaner
40-1: 16 fluid oz.

PJ1 Professional Line of environmentally safe shop chemicals all contain non-chlorinated solvents that won’t contaminate motor oils. PJ1 Professional Carb & Choke Cleaner is designed to clean, degrease and remove varnish and other contaminants from motorcycle carburettors, passages and components.

APPLICATION AND PERFORMANCE:
  • Easy Spray Formula
  • No flushing or water needed
  • Saves time and easy to use
  • Not harmful to rubber, vinyl or neoprene
  
PJ1 Pro Brake Cleaner PJ1 Pro Brake Cleaner
40-2: 13 oz. aerosol
40-2-1: 13 oz aerosol

PJ1 Professional Line of environmentally safe shop chemicals all contain non-chlorinated solvents that won’t contaminate motor oils. PJ1 Professional Brake Cleaner removes harmful contaminants from motorcycle disc or drum brake components by cleaning and degreasing then evaporating to leave a clean, dry surface.

APPLICATION AND PERFORMANCE:
  • Special additives are safe for all motorcycle brake units
  • Removes dirt and grease from brake pads, rotors
  • Cleans brake surfaces
PJ1 Pro Contact Cleaner PJ1 Carb & Choke Cleaner
40-3: 13 oz. aerosol

PJ1 Professional Line of environmentally safe shop chemicals all contain non-chlorinated solvents that won’t contaminate motor oils. PJ1 Professional Contact Cleaner removes carbon and contaminants from spark plugs and electrical components.

PJ1 Professional Contact Cleaner can be used on just about every part where cleaning/degreasing of metal surfaces is required.

APPLICATION AND PERFORMANCE:
  • Cleans and degreases in one step
  • Evaporates quickly leaving a clean dry surface
  • Multi-purpose cleaner has 1,001 uses
  
PJ1 Supercharger Lube PJ1 Supercharger Lube
40-4: 13 oz. aerosol

PJ1 Supercharger Lube™ will increase Blower performance and reliability. This premium-racing product has been in development for 3 years and is used by top NHRA Race Teams such as Budweiser King Racing. For use by professional racing teams PJ1 Supercharger Lube™ is specifically formulated to be 100% compatible with all racing fuel mixtures.
PJ1 Trackbite Traction Compound PJ1 Trackbite Traction Compound
SP-162: 1 gallon

Custom formulated resin that provides controlled traction for competition racing.

APPLICATION AND PERFORMANCE:
Apply a small amount of PJ1 TrackBite Traction Compound in front of drive wheels. Spin rear wheels with minimum engine power. Avoid hard burnouts whenever possible. Where liquid burnouts are prohibited, apply directly to tires with a brush, roller or sprayer.
  • Maximizes high performance traction
  • Adds traction by means of adhesion.
  • Does not soften tires
  • Water resistant, not washed away by rain
  • Used for 35 years by every NHRA and IHRA national racing event
Ideal for use in all types of racing on hard surfaces. Increases traction regardless of weather conditions, weight of vehicle or horsepower.
  
PJ1 Engine Assembly Lube PJ1 Engine Assembly Lube
SP-701: 11 oz. aerosol

PJ1 Engine Assembly Lube is a special blend of high-grade protective lubricants especially formulated to drastically reduce friction on internal engine components. This unique extreme pressure formula eliminates the damage caused by initial start-up and the critical first run in new and rebuilt high performance engine components.

PJ1 Engine Assembly Lube is used by top mechanics on Indy cars, NASCARS, Dragsters and Open Wheel racing teams providing them with the ultimate in lubricating protection. PJ1 Engine Assembly Lube does not have to be drained after break-in and blends with both petroleum and synthetic oils. The easy to apply spray formula allows the user to reach the difficult to coat surfaces. Excellent for use in transmission over hauls and on bearing replacements where disassembly is difficult.

For use on:
  • Transmission Gears
  • Bearings
  • Gears
  • Transmission, engine and rear-end internal components
  • Crankshafts
  • Cams
  • Rings
  • Timing Chains
   
  Home    VHT Home    Top of Page