 |
 |
 |
512-15:
1 1/2" 0–15 psi mechanical fuel pressure for carburettor vehicles.
White dial, chrome housing. |
512-16:
1 1/2" 0–15 psi liquid filled mechanical fuel pressure for carburettor vehicles.
White dial, chrome housing. |
512-20:
1 1/2" 0–100 psi mechanical fuel pressure for electronic fuel injection vehicles.
White dial, chrome housing (shown with black rubber boot surround). |
 |
 |
 |
512-21:
1 1/2" 0–100 psi liquid filled mechanical fuel pressure for electronic fuel injection vehicles.
White dial, chrome housing. |
524-04:
2" 30 Hg to 30 psi vac/boost gauge.
Silver dial, silver bezel. |
524-05:
2" 30 psi boost gauge (no vac).
Silver dial, silver bezel. |
 |
 |
 |
524-06:
2" fuel.
Includes sender.
Silver dial, silver bezel. |
524-07:
2" 15 psi fuel pressure.
Silver dial, silver bezel. |
524-15:
2" 50–150ºC mechanical oil temperature.
Silver dial, silver bezel. |
 |
 |
 |
524-16:
2" 100 psi mechanical oil pressure.
Silver dial, silver bezel. |
524-20:
2" 100 psi electrical oil pressure.
Includes sender.
Silver dial, silver bezel. |
524-21:
2", 50–100ºC electrical oil temperature.
Silver dial, silver bezel. Fitting kit included. |
 |
 |
|
524-22:
2" 8–16 volt voltmeter.
Silver dial, silver bezel. |
524-23:
2" 40–120ºC mechanical water temperature.
Silver dial, silver bezel. |
524-23a:
2" 40–120ºC mechanical water temperature, with four adaptors.
Silver dial, silver bezel. |
 |
 |
 |
|
524-30:
2" 40–120ºC electrical water temperature.
Silver dial, silver bezel. |
524-40:
2" air fuel ratio gauge
white dial
For use on cars with one, two, three or four wire oxygen sensors, running on unleaded petrol. Not recommended for cars running on leaded petrol. Can also be used on pre-EFI vehicles by matching with the 524-41 oxygen sensor. |
524-41:
2" one wire
oxygen sensor, complete with weld nut for connection to exhaust pipe. |
 |
|
|
524-51:
2" 60–0–60 amps ammeter.
Silver dial, silver bezel. |
|
|
To print this page, set the printer side margins in your browser to 7mm or less
 Home Gauges Home Top of Page
|
