On this page: |
Detailed descriptions of these products are contained in Speco’s Industrial and Automotive Rubber Products Catalogue. The catalogue describes the uses of each type of hose and gives technical specifications. Contact Speco to obtain a copy.
|
RUBBER HOSE
|
| | Part No. | Size | Length |
| | Rubber Fuel Hose—R7 |
| | 3111048-30 | 3/16" | 30m |
| | 3111048-7 | 3/16" | 7m |
| | 3111063-100 | 1/4" | 100m |
| | 3111063-30 | 1/4" | 30m |
| | 3111063-7 | 1/4" | 7m |
| | 3111079-100 | 5/16" | 100m |
| | 3111079-30 | 5/16" | 30m |
| | 3111079-7 | 5/16" | 7m |
| | 3111095-100 | 3/8" | 100m |
| | 3111095-30 | 3/8" | 30m |
| | 3111095-7 | 3/8" | 7m |
| | 3111127-7 | 1/2" | 7m |
| | Transmission Cooler Hose |
| | 311T079-30 | 5/16" | 30m |
| | 311T079-7 | 5/16" | 7m |
| | 311T095-30 | 3/8" | 30m |
| | 311T095-7 | 3/8" | 7m |
| | Vacuum and Washer Hose |
| | 3300025-15 | 7/64" | 15m |
| | 3300030-15 | 1/8" | 15m |
| | 3300040-15 | 5/32" | 15m |
| | 3300045-15 | 3/16" | 15m |
| | 3300055-15 | 7/32" | 15m |
| | 3300063-15 | 1/4" | 15m |
| | Radiator Overflow Hose |
| | 3300079-15 | 5/16" | 15m |
| | 3300095-15 | 3/8" | 15m |
| | Brake Vacuum Hose—tested to 87% |
| | 4205095-30 | 11/32" | 30m |
| | 4205095-7 | 11/32" | 7m |
| | 4205120-7 | 15/32" | 7m |
| | Car Heater Hose |
| | 4801095-100 | 3/8" | 100m |
| | 4801095-25 | 3/8" | 25m |
| | 4801127-100 | 1/2" | 100m |
| | 4801127-15 | 1/2" | 15m |
| | 4801160-100 | 5/8" | 100m |
| | 4801160-15 | 5/8" | 15m |
| | 4801191-15 | 3/4" | 15m |
| | Power Steering Return Hose |
| | 5130079-30 | 5/16" | 30m |
| | 5130079-7 | 5/16" | 7m |
| | 5130100-7 | 10mm | 7m |
FUEL INJECTION HOSE R9
|
| | Part No. | Size | Length | Max Bow |
| | H533063-7M | 1/4" | 7m | 6.9 |
| | H533079-7M | 5/16" | 7m | 6.9 |
| | H533095/7M | 3/8" | 7m | 6.9 |
R9 hose is designed to run at higher pressures and temperatures than normal fuel injection hoses. Suitable for petrol with a max E20 rating and diesel with a max B10 rating. ALL FUEL AND FUEL INJECTION HOSES ARE NOT SUBMERSIBLE FOR IN-TANK USE |
|
HEATER HOSE MERCHANDISER
This neatly holds all automotive heater hoses—strongly built, powder-coated, free-standing, easy dispensing of hose—and comes with a stock of the three most popular heater hose sizes and features easy front loading, metric and imperial measuring scales, with easy to read size markings.
Products include two coils each of the following heater hose:
- 1/2" (12.7 mm) x 15m
- 5/8" (16.0mm) x 15m
- 3/4" (19.1mm) x 15m
|
|
AUTOMOTIVE HOSE MERCHANDISERFeatures:
- Fully powder coated steel cabinet holding twelve 7.5 metre spools
- Contains four types of hose in ten assorted sizes
- Wall mountable
- Front loading
- Metric and imperial measuring scale
- Clear marking of hose type and size
|
| Products included: |
| Brake vacuum hose | 11/32" (9.5mm) I.D. 1 x 7m |
| Transmission cooler hose | 5/16" (7.9mm) I.D. 2 x 7m |
| Fuel hose | 3/16" (4.8mm), 1/4" (6.3mm), 5/16" (7.9mm) |
| | 3/8" (9.5mm), each 7m. |
| Windshield washer, vacuum | 7/64" (2.5mm), 1/8" (3.0mm), 5/32" (4.0mm) |
| and emission tubing | 7/32" (5.5mm), 1/4" (6.3mm), each 15 metres |
|
|
90º UNIVERSAL HOSE BENDS
90ºdegree universal hose bends available in the most popular sizes, suitable for any array of automotive and industrial uses. They are not suitable for use with petroleum products.
|
| | | | Length
in mm |
| | Part No. | I.D. | A | R |
| | PCHNB13 | 12.70 | 140 | 50 |
| | PCHNB16 | 15.90 | 140 | 50 |
| | PCHNB19 | 19.05 | 140 | 50 |
| | PCHNB22 | 22.25 | 140 | 50 |
| | PCHNB25 | 25.40 | 140 | 50 |
| | PCHNB35 | 34.95 | 140 | 50 |
| | PCHNB37 | 37.80 | 140 | 50 |
| | PCHNB38 | 38.10 | 140 | 50 |
A is the length of each side in mm. R is the degrees of angle at the corner. |
|
|
UNIVERSAL HOSE BENDS
FOR PETROLEUM PRODUCTS
These U bend hoses are manufactured to high standards and are suitable for an array of automotive and industrial uses. They are intended to convey petroleum products only. |
| | Part No. | I.D. | Length (A) |
| | PCHUB8 | 8.00 | 260 |
| | PCHUB10 | 10.00 | 280 |
A is the length of each side in mm. |
|
|
Z SHAPED HOSE BENDS
Our range of Z shaped hose bends is one of the most extensive available. These hoses can be configured into the various forms demanded by today’s complicated and cramped engine bays. They can also be used in many industrial applications. Note that these hoses should only be used to convey the liquids specified.
|
| | Part No. | Type | I.D. |
| | HHZ6 | Water | 6 |
| | HHZ8 | Water | 8 |
| | HHZ10 | Water | 10 |
| | HHZ12 | Water | 12 |
| | HHZ16 | Water | 16 |
| | HFEZ6 | Fuel vapour/vac. vent | 6 |
| | HFEZ8 | Fuel vapour/vac. vent | 8 |
| | HFEZ10 | Fuel vapour/vac. vent | 10 |
| | HFEZ12 | Fuel vapour/vac. vent | 12 |
| | HFZ6 | Fuel (no EFI) | 6 |
| | HFZ8 | Fuel (no EFI) | 8 |
| | HFZ10 | Fuel (no EFI) | 10 |
| | HFZ12 | Fuel (no EFI) | 12 |
|
|
STRAIGHT HOSE
Made from high quality rubber and has many automotive and industrial applications.
COOLANT HOSE
| | Part No. | I.D. | Length |
| | SRH25 | 25mm | 1000mm |
| | SRH28 | 28mm | 1000mm |
| | SRH32 | 32mm | 1000mm |
| | SRH35 | 35mm | 1000mm |
| | SRH38 | 38mm | 1000mm |
| | SRH50 | 50mm | 1000mm |
| | SRH50.5
5 mt length | 50mm | 500mm |
| | SRH54 | 54mm | 1000mm |
| | SRH54.5
5 mt length | 54mm | 500mm |
Not suitable for use with petroleum-based products |
 |
FUEL HOSE
| | Part No. | I.D. | Length |
| | SOH16 | 16mm | 1000mm |
| | SOH25 | 25mm | 1000mm |
| | SOH32 | 32mm | 1000mm |
| | SOH35 | 35mm | 1000mm |
| | SOH38 | 38mm | 1000mm |
| | SOH42 | 42mm | 1000mm |
| | SOH45 | 45mm | 1000mm |
| | SOH50 | 50mm | 1000mm |
| | SOH50.5
5 mt length | 50mm | 500mm |
| | SOH57 | 57mm | 1000mm |
| | SOH57.5
5 mt length | 50mm | 500mm |
| | SOH63 | 63mm | 1000mm |
| | SOH63.5
5 mt length | 50mm | 500mm |
|  |
|
|
SUBMERSIBLE FUEL HOSE R10
Codan R10 Submersible Fuel Hose is specifically designed for in-tank applications where the hose is in constant contact with fuel and other liquid petroleum fuels.
This hose is suitable to handle fuel, alcohol-extended fuel or diesel on the inside and the outside when fully immersed, mobile or stationary for both automotive and marine applications.
The inner liner is made from FKM (Viton) which resists gas permeation and reards aging, the inner tube from NBR (Nitrile) with an outer cover of CPPE (Chlorinated Polyethylene). This hose conforms to the stringent requirements of SAE J30 R1O SPECIFICATIONS for submersible fuel line hose.
This hose is engineered for constant contact on the inside and outside and is excellent for use on fuel pumps in the gas tank.
FEATURES:
Aramid Fiber reinforcement offers
- Higher working pressures
- Increased burst strength
- Maximum temperature rating: +150°C
| | I.D. | Wall Thickness | O.D. | Working Pressure | Bend Radius | Weight | Length |
| PART NO. | (mm) | (inch) | (mm) | (mm) | (Bar) | (Mpa) | (mm) | (gm/m) | (mm) |
| ITF391022 | 7.9 | 5/16 | 3.0 | 14.0 | 6.9 | 0.69 | 25 | 165 | 300 |
|
Home Accessories Home Top of Page
|
